Sheets and Rolls

Page 1 of 1:    8 Items

Aluminium Oxide Paper in 50m rolls ( brown)

Aluminium Oxide Paper in 50m rolls ( brown)£22.00

Alox paper in 50m rolls

Paper Backed Aluminium Oxide Rolls

Paper Backed Aluminium Oxide Rolls£22.00

Alox paper abrasive

Abrasive Roll

Abrasive Roll£7.19  -  £11.00

Sianet abrasive roll

Sianet abrasive roll£6.15

Alox Paper 115mm by 10

Alox Paper 115mm by 10£5.00

Alox paper in 5m rolls

Aluminium Oxide in 10m rolls (brown)

Aluminium Oxide in 10m rolls (brown)£5.00

Alox paper in 10m rolls (brown)

Aluminium Oxide Rolls in 10m

Aluminium Oxide Rolls in 10m£5.00

Aluminium Oxide abrasive in 10m rolls

Klingspor Foam Backed sheets PS73 BWF

Klingspor Foam Backed sheets PS73 BWF£1.60

Klingspor foam backed sheets

 

Page 1 of 1:    8 Items

How to work out the taper for Drum sanders

To cut your own abrasive from a roll to fit a drum sander such as the Jet 22-44 take the diameter on the drum in mm, multiply that by 3.14 to get the circumference and using a steel rule measure that distance from side to side diagonally across the sheet, 6" = 152.4mm x 3.14 = 478.5mm for 4" roll  it should be 12 degrees and for 6" paper 18.5 degrees. for other drum diameters and paper widths the results are different. then when you line the cut up with the drum edge it goes right round and the paper traverses one width per revolution.